Quantum asymmetric key crypto scheme using Grover iteration.

Here, we propose a quantum asymmetric key cryptography scheme using Grover's quantum search algorithm. In the proposed scheme, Alice generates a pair of public and private keys, keeps the private keys safe, and only discloses public keys to the outside. Bob uses Alice's public key to send a secret message to Alice and Alice uses her private key to decrypt the secret message. Furthermore, we discuss the safety of quantum asymmetric key encryption techniques based on quantum mechanical properties.

Improvement of image quality using amplitude-based respiratory gating in PET-computed tomography scanning.

OBJECTIVES: This study sought to provide data supporting the expanded clinical use of respiratory gating by assessing the diagnostic accuracy of breathing motion correction using amplitude-based respiratory gating. METHODS: A respiratory movement tracking device was attached to a PET-computed tomography scanner, and images were obtained in respiratory gating mode using a motion phantom that was capable of sensing vertical motion. Specifically, after setting amplitude changes and intervals according to the movement cycle using a total of nine combinations of three waveforms and three amplitude ranges, respiratory motion-corrected images were reconstructed using the filtered back projection method. After defining areas of interest in the acquired images in the same image planes, statistical analyses were performed to compare differences in standardized uptake value (SUV), lesion volume, full width at half maximum (FWHM), signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR). RESULTS: SUVmax increased by 89.9%, and lesion volume decreased by 27.9%. Full width at half maximum decreased by 53.9%, signal-to-noise ratio increased by 11% and contrast-to-noise ratio increased by 16.3%. Optimal results were obtained when using a rest waveform and 35% duty cycle, in which the change in amplitude in the respiratory phase signal was low, and a constant level of long breaths was maintained. CONCLUSIONS: These results demonstrate that respiratory-gated PET-CT imaging can be used to accurately correct for SUV changes and image distortion caused by respiratory motion, thereby providing excellent imaging information and quality.

Encoding scheme using quantum dots for single logical qubit information onto four-photon decoherence-free states.

We designed an encoding scheme, using quantum dots (QDs), for single logical qubit information by encoding quantum information onto four-photon decoherence-free states to acquire immunity against collective decoherence. The designed scheme comprised of QDs, confined in single-sided cavities (QD-cavity systems), used for arbitrary quantum information, encoded onto four-photon decoherence-free states (logical qubits). For our scheme, which can generate the four-photon decoherence-free states, and can encode quantum information onto logical qubits, high efficiency and reliable performance of the interaction between the photons and QD-cavity systems is essential. Thus, through our analysis of the performance of QD-cavity systems under vacuum noise and sideband leakage, we demonstrate that the encoding scheme for single logical qubit information could be feasibly implemented.

Photonic scheme of discrete quantum Fourier transform for quantum algorithms via quantum dots.

We propose an optical scheme of discrete quantum Fourier transform (DQFT) via ancillary systems using quantum dots (QDs) confined in single-sided cavities (QD-cavity systems). In our DQFT scheme, the main component is a controlled-rotation k (CRk) gate, which utilizes the interactions between photons and QDs, consisting of two QD-cavity systems. Since the proposed CRk gate can be experimentally implemented with high efficiency and reliable performance, the scalability of multi-qubit DQFT scheme can also be realized through the simple composition of the proposed CRk gates via the QD-cavity systems. Subsequently, in order to demonstrate the performance of the CRk gate, we analyze the interaction between a photon and a QD-cavity system, and then indicate the condition to be efficient CRk gate with feasibility under vacuum noise and sideband leakage.

Image quality assessment with dose reduction using high kVp and additional filtration for abdominal digital radiography.

PURPOSE: Dose reduction using additional filters with high kilovoltage peak (kVp) for abdominal digital radiography has received much attention recently. We evaluated image quality with dose reduction in abdominal digital radiography by using high kVp and additional copper filters at a tertiary hospital. METHODS: Between June 2016 and July 2016, 82 patients underwent abdominal digital radiography using 80 kVp in X-ray room 1 and 82 were imaged using 92 kVp with 0.1-mm copper filtration in X-ray room 2. The effective dose was calculated using a PC-based Monte Carlo program. Image quality of the abdominal radiography acquired in the two rooms was evaluated using a five-point ordinal scale, as well as the signal-to-noise and contrast-to-noise ratios. RESULTS: The mean effective dose decreased by 25.8% and 25.7% for the supine and standing positions, respectively, when abdominal digital radiography using 92 kVp with 0.1-mm copper filtration was performed. In the 20 patients who performed abdominal digital radiography twice in each room, visual grading scores for visualisation of psoas outlines and kidney outlines are higher in room 1. However, there was no statistical significant difference of visual grading scores among the 124 patients who underwent only one abdominal radiography in the room 1 or 2 (P > 0.05). CONCLUSIONS: Dose reduction for abdominal digital radiography can be achieved with comparable image quality by performing abdominal digital radiography using 92 kVp with 0.1-mm copper filtration, despite the higher AEC dose.

Optical scheme for generating hyperentanglement having photonic qubit and time-bin via quantum dot and cross-Kerr nonlinearity.

We design an optical scheme to generate hyperentanglement correlated with degrees of freedom (DOFs) via quantum dots (QDs), weak cross-Kerr nonlinearities (XKNLs), and linearly optical apparatuses (including time-bin encoders). For generating hyperentanglement having its own correlations for two DOFs (polarization and time-bin) on two photons, we employ the effects of optical nonlinearities using a QD (photon-electron), a parity gate (XKNLs), and time-bin encodings (linear optics). In our scheme, the first nonlinear multi-qubit gate utilizes the interactions between photons and an electron of QD confined in a single-sided cavity, and the parity gate (second gate) uses weak XKNLs, quantum bus, and photon-number-resolving measurement to entangle the polarizations of two photons. Finally, for efficiency in generating hyperentanglement and for the experimental implementation of this scheme, we discuss how the QD-cavity system can be performed reliably, and also discuss analysis of the immunity of the parity gate (XKNLs) against the decoherence effect.

Implementation of controlled quantum teleportation with an arbitrator for secure quantum channels via quantum dots inside optical cavities.

We propose a controlled quantum teleportation scheme to teleport an unknown state based on the interactions between flying photons and quantum dots (QDs) confined within single- and double-sided cavities. In our scheme, users (Alice and Bob) can teleport the unknown state through a secure entanglement channel under the control and distribution of an arbitrator (Trent). For construction of the entanglement channel, Trent utilizes the interactions between two photons and the QD-cavity system, which consists of a charged QD (negatively charged exciton) inside a single-sided cavity. Subsequently, Alice can teleport the unknown state of the electron spin in a QD inside a double-sided cavity to Bob's electron spin in a QD inside a single-sided cavity assisted by the channel information from Trent. Furthermore, our scheme using QD-cavity systems is feasible with high fidelity, and can be experimentally realized with current technologies.

Distribution of hybrid entanglement and hyperentanglement with time-bin for secure quantum channel under noise via weak cross-Kerr nonlinearity.

We design schemes to generate and distribute hybrid entanglement and hyperentanglement correlated with degrees of freedom (polarization and time-bin) via weak cross-Kerr nonlinearities (XKNLs) and linear optical devices (including time-bin encoders). In our scheme, the multi-photon gates (which consist of XKNLs, quantum bus [qubus] beams, and photon-number-resolving [PNR] measurement) with time-bin encoders can generate hyperentanglement or hybrid entanglement. And we can also purify the entangled state (polarization) of two photons using only linear optical devices and time-bin encoders under a noisy (bit-flip) channel. Subsequently, through local operations (using a multi-photon gate via XKNLs) and classical communications, it is possible to generate a four-qubit hybrid entangled state (polarization and time-bin). Finally, we discuss how the multi-photon gate using XKNLs, qubus beams, and PNR measurement can be reliably performed under the decoherence effect.

Effect of Triplet Harvesting on the Lifetime Based on Fluorescence and Phosphorescence in Hybrid White Organic Light Emitting Diodes.

We investigated efficient hybrid white organic light emitting diodes (WOLEDs) apply to triplet harvesting (TH) concept based on three complementary colors by mixing containing blue fluorescent emitter with phosphorescent emitters. The TH is to transfer these triplet excitons from a fluorescence to a phosphorescence, where they can decay radiatively. We fabricated several hybrid WOLEDs, having various emitting layer structures with blue fluorescent emitter and red, green phosphorescent emitter. The WOLED exhibited maximum luminous efficiency of 9.02 cd/A, and a maximum external quantum efficiency of 4.17%. The WOLED showed a highly color-stable white emission with the Commission International de L'Éclairage chromaticity of (0.38, 0.36) at 1,000 cd/m2.

Blue Fluorescent Materials Composed of Anthracene-Aryl Amine-Anthracene Derivatives for Organic Light-Emitting Diodes.

Blue fluorescent emitters based on anthracene-aryl amine-anthracene derivatives were studied for efficient OLEDs. Compound 1 exhibited efficient EL propereties with luminous and power efficien- cies of 4.50 cd/A and 1.75 lm/W at 200 mA/cm2, respectively and CIE coordinates of (0.18, 0.26) at 7.0 V.

Effect of Stepwise Doping on Lifetime and Efficiency of Blue and White Phosphorescent Organic Light Emitting Diodes.

We investigated a light emission mechanism of blue phosphorescent organic light emitting diodes (PHOLEDs), using a stepwise doping profile of 2, 8, and 14 wt.% within the emitting layer (EML). We fabricated several blue PHOLEDs with phosphorescent blue emitter iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,C2]picolinate doped in N,N'-dicarbazolyl-3,5-benzene as a p-type host material. A blue PHOLED with the highest doping concentration as part of the EML close to an electron transporting layer showed a maximum luminous efficiency of 20.74 cd/A, and a maximum external quantum efficiency of 10.52%. This can be explained by effective electron injection through a highly doped EML side. Additionally, a white OLED based on the doping profile was fabricated with two thin red EMLs within a blue EML maintaining a thickness of 30 nm for the entire EML. Keywords: Blue Phosphorescent Organic Light Emitting Diodes, Stepwise Doping Structure, Charge Trapping Effect.

Optimization of Semitransparent Anode Electrode for Flexible Green and Red Phosphorescent Organic Light-Emitting Diodes.

In this paper, we demonstrated thin film semitransparent anode electrode using Ni/Ag/Ni (3/6/3 nm) on green and red phosphorescent OLEDs, which have basically high efficiency and good optical characteristics. Moreover, we applied this semitransparent anode on flexible green and red phosphorescent OLEDs, which were then optimized for possible applications on flexible substrates. First, we studied optimization using various conditions of Ni/Ag/Ni electrodes via transmittance and sheet resistance. We then fabricated the devices on a glass substrate with ITO or Ni/Ag/Ni electrodes as well as on a flexible substrate with a Ni/Ag/Ni electrode for green and red phosphorescent OLEDs. Consequently, we could be proposed that the potential of our semitransparent anode electrode is demonstrated. Green phosphorescent OLEDs characteristics using ITO or Ni/Ag/Ni anode electrodes were coincided and those of the red phosphorescent OLEDs were improved by semitransparent electrodes at 10,000 cd/m2 criterion. Therefore, this research suggests for additional studies to be conducted on flexible and high-performance phosphorescent OLED displays and light applications for ITO-free processes.

Improved Performance of Red Phosphorescent Organic Light Emitting Diodes Using Partial Mixed Host System.

Phosphorescent organic light-emitting diodes (PHOLEDs) have shown a heterojunction system that is a bulk heterojunctioned emitting layer (EML). In our work, we have demonstrated an improvement in efficiency with a partial mixed host system in an EML. A mixed host system, which is mixed with a host material and an electron transporting material, was used on the red PHOLEDs. In general, the recombination zone is located at the electron transporting layer (ETL) side in typical PHOLEDs due to excessive accumulation at the interface. However, this study proposed the removal of interfaces through the advantage of a mixed host system and a mixed layer between EML and ETL sides to increase the electron mobility of the experiments. Detailed optical and electrical analysis of these phenomena, were demonstrated.

Tri-Metal Layered Semitransparent Electrode for Red Phosphorescent Organic Light-Emitting Diodes.

In this paper, we fabricated tri-metal layered thin film semitransparent electrodes consisting of a thin conductive metal layer, sandwiched between two nickel layers. An equal red phosphorescent organic light-emitting diode (PHOLED) structure was deposited on the anodes of indium tin oxide (ITO) and three types of tri-metal layers (Ni/Al/Ni, Ni/Cu/Ni, and Ni/Ag/Ni, thickness of 3/7/3 nm in common) on a glass substrate. The optical and electrical performances of the device using Ni/Ag/Ni were improved more than the performances of the other devices due to the micro-cavity effect in accordance with the various electrode characteristics. Moreover, we fabricated the same red PHOLED structures on a flexible substrate, as a consequence, showed competitive emission characteristics compared to the devices fabricated on a glass substrate. Therefore, this study could succeed to additional research on flexible display panel and light-emitting devices with ITO-free electrodes.

Enhancement of light extraction efficiency of OLEDs using Si3N4-based optical scattering layer.

An optical scattering layer, consisting of a Si3N4 nano-pillar array and a spin-coated hydrogen silsesquioxane (HSQ) planarization layer, was introduced to an organic light-emitting diode (OLED) substrate to increase the out-coupling efficiency. After plasma enhanced chemical vapor deposition (PECVD) of the Si3N4 layer, the nano-pillar array was created using nanoimprint lithography and reactive ion etching. As the Si3N4 pillar array has a refractive index of 2.0, photons generated in the organic layer are scattered by the Si3N4 structures and thus have a higher chance of being emitted from the device. The spin-coated HSQ planarization layer produces a flat substrate, which is essential for depositing a uniform organic material layer and assuring the electric conductivity of the transparent conducting oxide (TCO) layer. In this study, Si3N4 nano-structures with a height of 100 or 300 nm were used to enhance the out-coupling efficiency of the OLED devices. Although the electrical conductivity of the TCO layer deposited on the light scattering layer was slightly degraded, the OLED devices formed with the light scattering layer exhibited a higher luminous power at given electrical power. Consequently, the use of a planarized 300-nm-thick Si3N4 layer increased the external quantum efficiency of the OLED device by 50% at 10,000 cd/m2 compared to the reference OLED device fabricated on a flat glass substrate.

Semitransparent Ni/Ag/Ni electrode for use as anode in flexible red phosphorescent organic light-emitting diodes.

We suggested that Ni/Ag/Ni semitransparent electrodes for the exchange of indium-tin-oxide (ITO) electrode, which is the most commonly used as a transparent electrode in spite of the structural defects, limited supply of indium, and toxic, could be apply on flexible Organic Light-Emitting Diodes (OLEDs). Red phosphorescent OLEDs (PHOLEDs) using different types of electrodes as ITO and various conditions of Ni/Ag/Ni electrode were fabricated and analyzed. The electrical and optical properties of device using Ni/Ag/Ni electrode were improved than that of devices on ITO glass substrate at the 10,000 cd/m2 criterion due to the micro-cavity effect even though their transmittance has lower than ITO glass. In addition, we also fabricated red PHOLEDs of same structure on Ni/Ag/Ni flexible substrate of various conditions. As a result, flexible red PHOLED showed competitive characteristics compared to the device on a glass substrate. Therefore, this study could be suggested to additional research on flexible OLEDs display and light applications for ITO-free fabrication.

Performance improvement of green phosphorescent organic light emitting diodes with partial bulk heterojunctioned emitting layer.

Green phosphorescent organic light emitting diodes (PHOLEDs) were developed using a mixed layer system. They were fabricated with 4,4'-N,N'-dicarbazolyl-biphenyl (CBP) and typical charge transporting materials, which are 4,4'-bis[N-(naphthyl)-N-phenylamino]biphenyl (NPB) as a hole transporting material and 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) as an electron transporting material, mixed at each interface in a stacked organic layer to reduce the hole injection barrier and extend the recombination zone. We introduced a mixed layer for the hole transporting layer side, the electron transporting layer side, and on both sides to make a bulk heterojunction. This reduced the driving voltage, and the luminous efficiency (LE) was increased to 500 cd/m2. The optimized device showed a maximum LE of 59.87 cd/A and a maximum external quantum efficiency of 17.52%.

Flexible bottom-emitting white organic light-emitting diodes with semitransparent Ni/Ag/Ni anode.

We fabricated a flexible bottom-emitting white organic light-emitting diode (BEWOLED) with a structure of PET/Ni/Ag/Ni (3/6/3 nm)/ NPB (50 nm)/mCP (10 nm)/7% FIrpic:mCP (10 nm)/3% Ir(pq)(2) acac:TPBi (5 nm)/7% FIrpic:TPBi (5 nm)/TPBi (10 nm)/Liq (2 nm)/ Al (100 nm). To improve the performance of the BEWOLED, a multilayered metal stack anode of Ni/Ag/Ni treated with oxygen plasma for 60 sec was introduced into the OLED devices. The Ni/Ag/Ni anode effectively enhanced the probability of hole-electron recombination due to an efficient hole injection into and charge balance in an emitting layer. By comparing with a reference WOLED using ITO on glass, it is verified that the flexible BEWOLED showed a similar or better electroluminescence (EL) performance.